We have a large range of springs to suit our specific applications. Please fill in the fields in the configuration section, so we can allocate the springs for the job.
Using good suspension provides more safety on the bike and is one of the cheapest ways to optimize your motorcycle!
Our products are supplied in “plug and play” kits with all information(in combination with the motorcycle manufactures handbook) to install and adjust the suspension of the specific motorcycle… your motorcycle!
Good suspension will always react different on your bike. The first half of the spring would be supple and would react flexible so that small bumps and irregularities are absorbed. If the spring would be further compressed, the spring would become more stiff, so that even big bumps and holes in the road would be absorbed and wouldn’t let the shocks and fore forks fuse. However, for cost-efficiency reasons, new motorbiks are equipped with linear springs. Compressing the top half of this spring takes as much force as compressing the bottom half. The result is that the top of the spring is in fact too rigid and the bottom too supple. Fortunately, this perfect world exists. Hyperpro produces rising spring rate springs where the first part can be easily compressed, and where compression of the last part is much harder. Also, we design springs that fluently give you the comfortableness or the harness you need at the right time while riding the bike. Learn all about the benefits on this page!
In order to achieve the full benefit of our suspension products, we made provision in the “Configure” section to address the following points:
-Passenger and /or luggage weight (if applicable)
-Rising the bike
-Lowering the bike
-Color scheme-payment options
-Correct oil if needed